Finestone Platinum CI Stucco Plus
A premium continuously insulated cement plaster stucco system featuring Finestop air/water-resistive barrier.
FEATURES | BENEFITS |
Design meets ASHRAE design standards and IGCC/IECC code requirements for the use of continuous insulation | Highly energy efficient and easy to specify |
Incorporates fluid-applied monolithic air/water-resistive barrier | Durable, seamless building wrap is highly resistant to water and air infiltration |
Provides a drainage plane | Directs incidental moisture out of the wall assembly |
100% Acrylic, reinforced base coats | Produce a weather-resistant barrier; provide crack resistance |
Factory prepared STUCCOBASE | Minimizes potential site mixing errors; improves quality control |
Available self-furred glass fiber reinforcing lath in durable plaster base | Will not rust |
Fade-, abrasion- and dirt-resistant finishes | Lower maintenace |
Uses
For exterior walls in new and retrofit commercial, institutional and residential construction when a continuous high effective R-value is needed to meet energy or eco-efficiency standards, and/or when a rainscreen is desired or required to satisfy code issues related to drainage.
Apply the system directly to the following acceptable substrates:
- ASTM C1177 type sheathings, including DensGlass™ exterior sheathing, eXP™ sheathing, GlasRoc® sheathing, Securock™ glass-mat sheathing, Weather Defense™ Platinum sheathing, and GreenGlass® sheathing
- PermaBase™ cement-board by National Gypsum and other cement-boards (ASTM C1325 Type A Exterior)
- Untreated Exposure I or exterior plywood sheathing (grade C-D or better)
- Untreated Exposure I OSB
- Gypsum sheathing (ASTM C79/ASTM C1396)
- Poured concrete/unit masonry
